1. Introduction
Error Code E50 is a common issue that typically appears on Brother printers. This error message generally pops up during the machine’s initializing sequence or in the middle of a print job. When this error appears, your Brother printer will stop printing and ask you to restart the machine.
2. What Does Error Code E50 Mean?
The E50 error code on Brother printers is essentially indicating a malfunction with the fuser unit of the printer. This is the part of the machine that “fuses” the toner on the paper with heat, making it an essential stage of the printing process.
3. What Causes This Error?
The E50 error message may appear due to the following reasons:
– The fuser unit might be damaged or worn out.
– There could be loose connections or faulty wiring in the unit.
– The internal temperature of the fuser unit could be fluctuating excessively.
– The fuser thermostat may be defective.
4. How to Fix Error Code E50
Fix #1: Restart Your Printer
Often minor glitches can be fixed by simply restarting your Brother printer.
Fix #2: Check the Fuser Unit
Open the back of the printer and remove the fuser unit carefully (after it has cooled down). Inspect for any signs of wear, damage or defective wiring.
Fix #3: Replace Fuser Unit
If the fuser unit is damaged, it needs to be replaced with a new one. It’s recommended to purchase it from a Brother authorized supplier to ensure compatibility.
5. Additional Tips
Keep your Brother printer updated with the latest firmware to prevent this error. Regularly clean your printer to ensure uninterrupted performance. Always back up any important print jobs to prevent loss of data.
6. When to Contact Support
If the error persists even after trying these solutions, it’s best to contact Brother Support. They can guide you better and suggest if your printer requires professional servicing.
7. Conclusion
The Brother E50 error code signifies an issue with the fuser unit of the printer. Although it can be concerning, it can often be fixed with a simple restart, inspection of the fuser unit, or by replacing the fuser unit. Maintaining your printer regularly and keeping it updated can help prevent this error. If these solutions don’t resolve the issue, seeking professional help from Brother Support is recommended.